A socket joint is the core connecting component in PPR piping systems
Consists of a female (recessed) end and male (protruding) end, joined via heat fusion welding
ifan Pipeline’s sockets use German imported raw materials, compliant with ISO 9001 standards

2. Key Advantages of PPR Sockets

Leak-proof Design: Fusion creates monolithic structure, eliminating leakage risks of threaded joints
Temperature Resistance: Handles -20℃ to 95℃ long-term temperature variations
Corrosion Resistance: Chemically inert material suitable for acidic/alkaline fluids
Easy Installation: Requires no specialized tools, installable by single operator

3. Comparison of Socket Types

Type	Application Scenarios	Advantages	Precautions
Straight	Linear pipe connections	Low cost, high versatility	Control insertion depth
Elbow	90° directional changes	Built-in flow design reduces resistance	Avoid forced bending
Tee	Branch line connections	One-piece structure stronger	Pressure distribution
Reducer	Transition between sizes	Gradual design minimizes turbulence	Match pressure ratings

4. Installation Process

Cut pipe and clean ends
Heat socket and pipe ends (260℃±5℃) with professional welder
Insert quickly and hold for 10-15 seconds
Pressure test after cooling (0.6MPa for 1 hour recommended)

5. Common Applications

Residential plumbing systems (hot/cold water supply)
Solar water heater connections
Industrial circulating water systems
Underfloor heating manifolds

6. ifan Pipeline Solutions

Full range of socket sizes (DN20-DN110)
Custom sizes available (e.g., DN75×32 reducers)
Free welding training videos and technical manuals

7. FAQs

Q: Can PPR sockets weld with other materials?
A: Only compatible with PPR. Use transition fittings for metal/PEX connections

Q: How to fix failed welds?
A: Cut off defective section and re-weld with new socket

Q: What’s the service life?
A: Over 50 years under normal conditions

Messages récents

Commentaires récents

Red PEX hot-water return branch with a bronze circulator pump and two brass ball valves tying into the side of an unbranded commercial storage water heater, copper risers clipped to a grey block mechanical-room wall

Connaissances

What US Plumbing Code Requires of a Hot-Water Return Leg: UPC vs IPC vs ASHRAE 90.1, and Which Listed Pipe You May Actually Use for It

No US plumbing code orders you to build a hot-water return leg. IPC 2024 Section 607.2 caps developed length at 50 feet and counts recirculating piping as a source of hot water; the sentence requiring a dedicated return pipe sits in the energy code, at IECC 2024 Section C404.6.1. Which listed pipe may form it

Lire plus "

September 16, 2026 Pas de commentaires

Connaissances

Which Plumbing Products Must Be Lead-Free Under SDWA 1417: The Statutory Exemptions, State Overlays and Why NSF/ANSI 372 Is Not Annex G

A container of brass valves clears customs in Long Beach. The packing list holds three 2-inch main gate valves, a box of hose bibbs, two dozen shower valves, and the rest potable-branch fittings. Which lines needed a lead-free certificate before loading? Section 1417 of the Safe Drinking Water Act answers it, at 42 U.S.C. §300g-6,

Lire plus "

September 14, 2026 Pas de commentaires

Black polyethylene pipe coils and green polypropylene pipe bundles stacked on a sandy yard under harsh midday sun, one bundle covered with a grey tarpaulin, desert hills behind

Connaissances

How Much Pressure Rating Do You Actually Lose to Heat and Sun? De-Rating Curves for PPR, PEX, HDPE and PVC

A specifier in Riyadh, Lagos or Seville reads PN20 on a PP-R pipe and PN16 on a PE100 coil, and the site runs at 45 °C ambient for four months a year. Every one of those ratings is silently a 20 °C number. Polymer pipe UV and temperature derating comes down to one question: how

Lire plus "

September 12, 2026 Pas de commentaires

Les médias

What is PPR socket?