A socket joint is the core connecting component in PPR piping systems
Consists of a female (recessed) end and male (protruding) end, joined via heat fusion welding
ifan Pipeline’s sockets use German imported raw materials, compliant with ISO 9001 standards

2. Key Advantages of PPR Sockets

Leak-proof Design: Fusion creates monolithic structure, eliminating leakage risks of threaded joints
Temperature Resistance: Handles -20℃ to 95℃ long-term temperature variations
Устойчивость к коррозии: Chemically inert material suitable for acidic/alkaline fluids
Easy Installation: Requires no specialized tools, installable by single operator

3. Comparison of Socket Types

Type	Application Scenarios	Advantages	Precautions
Straight	Linear pipe connections	Low cost, high versatility	Control insertion depth
Elbow	90° directional changes	Built-in flow design reduces resistance	Avoid forced bending
Tee	Branch line connections	One-piece structure stronger	Pressure distribution
Reducer	Transition between sizes	Gradual design minimizes turbulence	Match pressure ratings

4. Installation Process

Cut pipe and clean ends
Heat socket and pipe ends (260℃±5℃) with professional welder
Insert quickly and hold for 10-15 seconds
Pressure test after cooling (0.6MPa for 1 hour recommended)

5. Common Applications

Residential plumbing systems (hot/cold water supply)
Solar water heater connections
Industrial circulating water systems
Underfloor heating manifolds

6. ifan Pipeline Solutions

Full range of socket sizes (DN20-DN110)
Custom sizes available (e.g., DN75×32 reducers)
Free welding training videos and technical manuals

7. FAQs

Q: Can PPR sockets weld with other materials?
A: Only compatible with PPR. Use transition fittings for metal/PEX connections

Q: How to fix failed welds?
A: Cut off defective section and re-weld with new socket

Q: What’s the service life?
A: Over 50 years under normal conditions

Последние сообщения

Последние комментарии

A stack of black polyethylene pressure water pipes with thin blue co-extruded stripes, seen from the pipe ends in an outdoor pipe yard in soft morning light

Знания

ASTM D3350 Cell Classification: How to Read PE445574C, and Why the Fifth Digit Is the PENT Test

The PPI Municipal Advisory Board’s model specification for PE4710 water pipe, revised in June 2026, asks for a compound meeting ASTM D3350 minimum cell classification PE445574C-CC3. That string answers what the standard is for. ASTM D3350 identifies a polyethylene pipe or fittings compound by six cell numbers and a letter: density, melt index, flexural modulus,

Читать далее "

September 24, 2026 Нет комментариев

Pallets of white and green plastic pressure pipe, strapped and wrapped in clear film, on a wet container terminal apron in front of an open 40 ft shipping container, with quay cranes and a container ship in the distance

Знания

Paying for Your First Pipe Container by L/C: The Document Set That Decides Whether the Bank Pays

A bank paying under a letter of credit never sees your pipe. Under UCP 600 (the 2007 revision, ICC Publication No. 600), the ICC rules that govern a credit stating it is subject to them, banks deal with documents and not with goods, and each examining bank has a maximum of five banking days following

Читать далее "

September 23, 2026 Нет комментариев

Electrofusion saddle fitting clamped onto a black HDPE water main in an open trench, orange fusion welding leads coiled on the sand beside it

Знания

HDPE Service Connections: Tapping Tee, Branch Saddle or Hot Tap — and the One That Fails Under Pressure

A 250 mm PE100 main runs live under a service road, and the drawing calls for a 32 mm domestic service off it. The schedule says HDPE saddle clamp, which is where the job starts to go wrong, because the phrase covers three products with three different consequences. An electrofusion tapping tee carries its own cutter and

Читать далее "

September 22, 2026 Нет комментариев

СМИ

Что такое розетка PPR?