PE100 means MRS 10,0 MPa — no more. The ISO 4427 design-stress table, PE100-RC vs PE100 key difference, and how to verify the grade shipped.
PE80 vs PE100 vs PE100-RC: What MRS Certifies and When RC Is Mandatory Lire plus "
SDR 17 is not the same pressure class in HDPE and PVC. Design coefficients, the contaminated-soil clause, and the enquiry line that makes quotes match.
HDPE vs PVC Water Main: What to Specify Before You Compare Quotes Lire plus "
Here is a fact most buyers never use against their supplier: the pipe product standard already contains an inspection plan. GB/T 18742.2-2017, the PP-R pipe part of China’s adoption of ISO 15874, mandates sampling inspection by GB/T 2828.1 at AQL 4.0 for appearance and dimensions. GB/T 2828.1 is the same attribute sampling scheme as ISO
Pre-Shipment Inspection for Pipe and Fittings: A 40-Point Checklist Lire plus "
You can put a PEX-B crimp or clamp fitting on PEX-A pipe. It is a standard-compliant joint, not a workaround, and the reason is that the letters A, B and C do not describe three different pipe sizes. They describe three ways of crosslinking the same polyethylene, and all three land in the same dimensional
Can You Use PEX-B Fittings on PEX-A Pipe? The ASTM Answer Lire plus "
BSP vs NPT from ISO 7-1, ISO 228-1 and ASME B1.20.1: size-by-size diameters, why 1/2 in and 3/4 in leak, and the exact PO callout.
BSP vs NPT Threads: What to Specify on an Export Order Lire plus "
Which ASTM or ASSE standard governs each PEX-to-copper transition, the size ceilings that decide what to stock, and the lead-free rule since Sept 2023.
PEX to Copper Pipe Fittings: Which Standard Governs Which Transition Lire plus "
How to qualify an HDPE pipe supplier: the 7-element marking check, the SDR/PN cross-check behind a price gap, four test reports, and UAE ECAS rules.
HDPE Pipe Supplier Selection: What to Verify Before You Order Lire plus "
Importing pipe incoterms packaging decisions usually get made in the wrong order. The Incoterm is negotiated first, the packing is left to the factory, and the importer only connects the two when a container arrives with an oval coil where a round one left the port. By then the question is not how to prevent
Incoterms and Packaging for Pipe Imports: Cutting Damage, Demurrage and Cost Lire plus "
Complete PEX Plumbing Pipe And Fittings Guide Core keyword: PEX plumbing pipe fittings | Reading time: ~12 minutes | For: Plumbing contractors and specifiers If you have installed plumbing systems in the last decade, you have almost certainly worked with PEX. Cross-linked polyethylene pipe has moved well past the “alternative material” stage. For many residential
1/2 pex pipe fittings sit at the center of most residential fitting orders, and the size trips up more buyers than any other. The tube measures 0.625 inches outside diameter, or 5/8 inch, because PEX is CTS-sized, named for copper tube size, not for its own wall. That one number explains half the confusion in
1/2 PEX Pipe Fittings: Sizes, Standards, and Specs Lire plus "
English English
Français
Русский
EspañolIFAN depuis 1993, offre PPR, PEX, PVC, HDPE, raccords en laiton, vannes en laiton, robinets en laiton, etc.
