СМИ

30 лет истории бренда

100+ агентов по всему миру

Немецкое технологическое оборудование

Десять серий закупок по принципу "одного окна

What Are the Two Methods of Joining PPR Pipes?

1. Introduction: The Core Importance of PPR Pipe Joining

  • PPR pipes are widely used in water supply/drainage and HVAC systems for their heat and corrosion resistance
  • Proper joining is critical for system tightness and service life (50+ years)
  • Two mainstream methods: Hot Melt Welding vs Electrofusion Welding

2. Method 1: Hot Melt Welding

2.1 Working Principle
  • Melts pipe and fitting surfaces to 260±5℃ using a hot melt machine, forming a monolithic joint after cooling
2.2 Step-by-Step Guide (with Diagram)
  1. Preparation: Cut pipes vertically with a pipe cutter, clean interfaces
  2. Heating: Insert pipe and fitting into the heating die (260℃) for 5-10 seconds (based on diameter)
  3. Quick Connection: Push pipe into fitting socket rapidly, hold for 10-15 seconds to prevent misalignment
  4. Cooling: Allow 30+ minutes for natural cooling; avoid stress during cooling
2.3 Key Advantages
  • Low cost (ideal for DN20-DN110), suitable for DIY projects
  • High joint strength (sealing equivalent to pipe body)
  • No additional sealants needed, environmentally friendly
2.4 Applications
  • Residential plumbing systems
  • Building heating pipe installations
  • Small-scale industrial pipelines

3. Method 2: Electrofusion Welding

3.1 Working Principle
  • Uses internal resistance wires in electrofusion fittings to generate heat, melting pipe and fitting for connection
3.2 Step-by-Step Guide (with Diagram)
  1. Precision Cutting: Ensure vertical pipe ends, remove oxide layer with a scraper
  2. Fitting Insertion: Push pipe into electrofusion fitting to the marked depth, maintain concentricity
  3. Electrical Fusion: Activate machine (24V, 50-120 seconds) according to fitting parameters
  4. Automatic Cooling: Let it cool naturally; built-in timer prevents premature handling
3.3 Key Advantages
  • High automation, consistent joint quality
  • Suitable for DN20-DN315 and confined spaces
  • Reduces human error, ideal for standardized projects
3.4 Applications
  • Municipal water supply projects
  • Industrial pipelines (chemical, pharmaceutical industries)
  • Rapid installation of prefabricated pipe modules

4. Comparison and Selection Guide

CriteriaHot Melt WeldingElectrofusion Welding
Equipment CostLow (~$70 hot melt machine)High (~$280 electrofusion machine + special fittings)
DifficultyRequires temperature/time controlLow training needed, automated
Speed~2 minutes per joint1-3 minutes per joint (diameter-dependent)
Material CompatibilityOnly for same PPR materialCan join PPR with PEX/PE etc.
Recommended DiameterDN20-DN110DN20-DN315

Choosing Tips:

  • Hot melt for small diameters (<DN63) and budget projects
  • Electrofusion for large diameters, complex environments, or mixed materials

5. Professional Installation Tips

  1. Tool Standards: Use equipment compliant with ISO 19867 for reliable results
  2. Environmental Control: Work at 5-40℃, <80% humidity; avoid wind affecting heat distribution
  3. Quality Check: Inspect symmetrical bead formation; no pressure on uncooled joints
  4. Safety Precautions: Wear heat-resistant gloves; wait 5 minutes before touching dies after power off

6. ifan Pipeline’s Joining Solutions

  • Full Product Range: Hot melt fittings (copper-inset elbows, tees) and electrofusion sockets
  • Custom Services: Special electrofusion fittings (sensor ports, non-standard sizes) available
  • Technical Support: Free equipment operation training and system pressure testing plans

Заключение

Hot melt and electrofusion are the two primary methods for joining PPR pipes, with choices based on diameter, application, and budget. As a 20-year industry leader, ifan Pipeline offers end-to-end solutions from basic fittings to intelligent joining equipment. Visit ifanultra.com for product catalogs and technical whitepapers.

Категории
Последние комментарии
Знания
ИФАН

What Makes PPH Ideal for Wastewater Systems?

During a chemical plant wastewater system upgrade, I recommended PPH pipes where stainless steel had failed in just two years. Five years later, the PPH system shows no signs of deterioration, demonstrating how this material excels in aggressive wastewater environments where metals often fail prematurely. PPH (polypropylene homopolymer) excels in wastewater applications due to its

Читать далее "
Знания
ИФАН

Does PPH Maintain Stability in High Temperatures?

While working on a chemical processing plant’s hot effluent system, I specified PPH piping that has now operated continuously at 85°C for over eight years without failure. This real-world performance demonstrates PPH’s exceptional thermal stability when properly selected and installed. Yes, PPH (polypropylene homopolymer) maintains excellent stability at high temperatures, with continuous service ratings of

Читать далее "
Знания
ИФАН

How Durable Are PPH Fittings in Harsh Environments?

I recently inspected a chemical processing plant where PPH fittings had served flawlessly for 15 years in acid exposure that destroyed metal components within months. This real-world validation demonstrated why PPH has become the preferred choice for aggressive industrial applications. PPH (Polypropylene Homopolymer) fittings demonstrate exceptional durability in harsh environments due to their superior chemical

Читать далее "
ru_RUРусский

Мы поддерживаем бесплатный образец, пожалуйста, свяжитесь с нами как можно скорее!

IFAN с 1993 года, предлагаем PPR, PEX, PVC, HDPE, латунные фитинги, латунные клапаны, латунные сгоны и т.д.