Les médias

30 ans d'histoire de la marque

Plus de 100 agents dans le monde

Équipement de traitement allemand

Dix séries de marchés publics à guichet unique

How to Stop a PPR Pipe from Leaking? 

1. Why Do PPR Pipes Leak?

  • Common Leak Causes:
    • Improper fusion welding (incorrect temperature, dirty surfaces)
    • Pipe aging (long-term exposure to high temperature/pressure)
    • Mechanical damage (excessive bending, heavy object pressure)
    • Low-quality fittings (inferior O-rings, non-compliant joints)
  • ifan Pipeline Tip: Certified PPR pipes (ISO 22510 compliant) reduce leakage risks by 60% with 30% improved anti-aging properties.

2. Quick Temporary Fixes for Different Leak Scenarios

▶ Minor Seepage (Cracks/Pinholes)
  1. Silicone Seal Method:
    • Turn off water supply, dry the surface
    • Apply food-grade waterproof silicone (≥2mm thickness), cure for 24 hours
    • Suitable for: Cold water pipes under 0.6MPa pressure
  2. Rubber Tape Wrapping:
    • Wrap a high-pressure rubber tape (≥3cm width) tightly around the leak
    • Secure with stainless steel clamps, tighten until no leakage
    • Note: Temporary solution – seek permanent repair within 24 hours
▶ Joint Leaks (Most Common Issue)
  • Re-tightening Method:
    1. Close upstream/downstream valves, release pressure
    2. Gently tighten the joint clockwise with a 专用 wrench (avoid over-tightening)
    3. Replace with ifan Pipeline’s EPDM food-grade O-rings if leaks persist

3. Permanent Repairs: Local Replacement to System Upgrade

▶ Local Pipe Segment Replacement (DIY-Friendly)
  1. Tools Needed: PPR pipe cutter, fusion welder (260±5℃), matching fittings
  2. Steps:
    • Cut out the leaking section (vertical cut, sand smooth edges)
    • Fusion-weld new fittings: Insert pipe to marked depth (e.g., 18mm for DN20)
    • Cooling Time: 5 mins for DN20, 8 mins for DN32
    • ifan Advantage: Patented anti-stick coating ensures 95% successful welding
▶ System-Level Upgrade (For Aging Systems)
  • Pressure Testing: Use a pump to test at 1.5x working pressure (e.g., 1.2MPa for 0.8MPa systems), allow ≤0.05MPa drop in 30 mins
  • Segmented Replacement: Prioritize pipes over 10 years old; use copper-inset PPR fittings for stronger joints

4. DIY vs Professional: When to Call a Plumber?

ScenarioRecommended ActionRisks
Main pipe burstContact a plumber immediatelyIncorrect repairs may cause full water shutdown
Buried pipe leakProfessional leak detection firstRandom excavation may damage structures
Large-diameter leaks (DN50+)Flange connection requiredLow-power welders may fail
Persistent hot water leaksReplace with high-temperature fittingsTemporary fixes fail under heat

5. 5 Golden Rules to Prevent PPR Pipe Leaks

  1. Buy Certified Products: Look for GB/T 18742 standard and S2.5 (hot water) wall thickness
  2. Follow Installation Standards: Clean pipe ends before fusion; avoid working below 5℃
  3. Allow Expansion Space: Install an expansion joint every 3m; use metal bellows for hot water systems
  4. Regular Inspections: Annual visual checks (focus on elbows/tees); record pressure changes
  5. Operate Within Limits: Long-term temp ≤70℃, max 瞬时 temp 95℃

6. ifan Pipeline: Your Leak Solution Expert

  • Full Repair Kit: Quick 抢修接头 with memory metal ring (install in 3 mins)
  • Custom Services: Leak detection + system design (free on-site survey in selected areas)
  • Technical Support: 24/7 online service, fusion video tutorials, pressure testing guides

Conclusion

Effectively stopping PPR pipe leaks requires matching solutions to leak types, pipe specs, and usage conditions. While temporary fixes buy time, permanent solutions rely on quality products and proper installation. With 20 years of expertise, ifan Pipeline offers end-to-end solutions for residential and industrial users. Visit ifanultra.com to download our PPR Pipe Maintenance Manual and get professional leak-proof advice today.

Connaissances
IFAN

What Makes PPH Ideal for Wastewater Systems?

During a chemical plant wastewater system upgrade, I recommended PPH pipes where stainless steel had failed in just two years. Five years later, the PPH system shows no signs of deterioration, demonstrating how this material excels in aggressive wastewater environments where metals often fail prematurely. PPH (polypropylene homopolymer) excels in wastewater applications due to its

Lire plus "
Connaissances
IFAN

Does PPH Maintain Stability in High Temperatures?

While working on a chemical processing plant’s hot effluent system, I specified PPH piping that has now operated continuously at 85°C for over eight years without failure. This real-world performance demonstrates PPH’s exceptional thermal stability when properly selected and installed. Yes, PPH (polypropylene homopolymer) maintains excellent stability at high temperatures, with continuous service ratings of

Lire plus "
Connaissances
IFAN

How Durable Are PPH Fittings in Harsh Environments?

I recently inspected a chemical processing plant where PPH fittings had served flawlessly for 15 years in acid exposure that destroyed metal components within months. This real-world validation demonstrated why PPH has become the preferred choice for aggressive industrial applications. PPH (Polypropylene Homopolymer) fittings demonstrate exceptional durability in harsh environments due to their superior chemical

Lire plus "
fr_FRFrançais

Nous acceptons les échantillons gratuits, veuillez nous contacter le plus rapidement possible !

IFAN depuis 1993, offre PPR, PEX, PVC, HDPE, raccords en laiton, vannes en laiton, robinets en laiton, etc.