Ferrule material, tube-size compatibility and where brass compression joints actually leak. EN 1254-2 and ASTM F1974 limits, plus what to specify.
Brass Compression Fittings: What to Specify Before You Order Lire plus "
A purchase order that says “PVC pressure pipe, 110 mm, PN 16” is complete. One that says “4 inch, high pressure” is not, and the gap between them is where most disputed PVC deliveries begin. PN, SDR, DR, Pressure Class and Pressure Rating are five labels for one physical property — wall thickness relative to
PVC Pressure Pipe PN & SDR: Which Class to Specify Lire plus "
What dezincification does to brass fittings, why the 15% zinc rule is wrong, and the exact alloy, heat-treatment and ISO 6509 / AS 2345 evidence to demand.
Dezincification of Brass: Why Fittings Fail and How to Verify DZR Lire plus "
What is HDPE pipe: PE100 means an MRS of 10.0 MPa, SDR sets the pressure class, and the PAS 1075 clause most buyers still specify has been withdrawn.
What Is HDPE Pipe? PE100, SDR and Pressure Explained Lire plus "
Brass or plastic PEX fittings? Compare ASTM F1807 and F2159 on size range, flow area, chlorine resistance, dezincification, lead-free rules and code acceptance.
Brass vs Plastic PEX Fittings: What Actually Decides Which You Stock Lire plus "
Most buyers meet HDPE corrugated pipe the same way: a drainage line on a tender drawing, a note saying “SN8 or equivalent”, and a supplier quote that comes in noticeably below the others. The quote is usually cheaper for a reason you cannot see from the outside, because everything that makes corrugated pipe work is
HDPE Corrugated and Culvert Pipe: Ring Stiffness, Cover Depth and Buyer Specs Lire plus "
PEX pipe fittings sizes look like the simplest spec in a plumbing catalogue. A 1/2-inch fitting goes on 1/2-inch tube, a 3/4-inch fitting goes on 3/4-inch tube, and the purchase order writes itself. That works right up until a container of technically-correct fittings lands somewhere the threads do not match the local pipework, or a
PEX Pipe Fittings Sizes: Bore and Thread Spec Chart Lire plus "
NSF 61 certification is the health-effects standard that governs materials in contact with drinking water, and it decides whether the pipe or fitting you import can legally touch potable water in most US jurisdictions. In plain terms, NSF/ANSI 61 does not read a datasheet or a bill of materials — it measures what actually leaches
NSF 61 Certification: What Pipe Buyers Must Verify Lire plus "
PVC pipe fittings hold together the drainage, cold-water, irrigation, and conduit systems that run through nearly every building on the planet, yet most buyers order them without knowing why a Schedule 80 elbow costs more than a Schedule 40 one, or why a fitting rated for potable water in one market fails inspection in another.
Learning how to glue PVC pipe the right way is the difference between a joint that holds for decades and one that weeps under pressure a week after you fill the line. The process people call “gluing” is really solvent welding, and the details you skip today are the details that leak later. Skip the
How to Glue PVC Pipe: Solvent Welding Step by Step Lire plus "
English English 
Français
Русский
Español
IFAN depuis 1993, offre PPR, PEX, PVC, HDPE, raccords en laiton, vannes en laiton, robinets en laiton, etc.
Skip the form. Message our team directly on WhatsApp.
