Global hot water system market grows at 7.3% annually
Requires fittings with high temperature resistance, corrosion resistance, and pressure tolerance
ifan Pipeline’s PPR fittings meet EU EN 12201 standards for 95℃ hot water systems

2. Core Performance Advantages

High Temperature Resistance:
- Long-term operation: 70℃ (50-year lifespan)
- Short-term peak: 95℃ (100-hour duration)
Pressure Rating:
- Standard classes: 1.25MPa/1.6MPa/2.0MPa
- Burst pressure: ≥5.0MPa (vs. industry standard 3.5MPa)
Corrosion Resistance:
- Chloride-ion resistant (vs. copper pitting corrosion)
- No electrochemical corrosion risks

3. Performance Comparison with Traditional Fittings

Parameter	PPR Fittings	Copper Fittings	Stainless Steel Fittings
Max Temperature	95℃	150℃	200℃
Long-Term Temp	70℃ (50 years)	100℃ (15 years)	120℃ (25 years)
Installation Cost	Low (heat fusion)	High (soldering)	Very High (welding)
Corrosion Resistance	Excellent	Good	Excellent
Thermal Expansion	0.15mm/m·K	0.017mm/m·K	0.016mm/m·K

4. Technical Requirements for Hot Water Systems

Expansion Compensation: Install expansion joints every 5 meters
Water Quality: Compliant with GB/T 17219 drinking water standard
Pressure Testing: Conduct 1.5x working pressure test per EN 805

5. ifan Pipeline Solutions

Patented Technologies:
- Copper-inset elbows
- Pressure-balanced tee fittings
Custom Services:
- Full DN20-DN110 sizes for hot water systems
- Free thermal expansion calculation service
Quality Assurance:
- NSF/ANSI 61 certified for drinking water
- 100% pressure tested (0.8MPa for 2 hours)

6. Typical Applications

Residential central heating systems (villas/apartments)
Hotel centralized hot water systems (40 tons/day capacity)
Solar thermal projects (differential temperature systems)
Industrial cooling loops (≤95℃ operating conditions)

7. Case Studies & Test Data

Hangzhou Luxury Residential Project: Zero leaks in 5 years
Laboratory Results:
- 95℃ cycling test: 5,000 hours no deformation
- 500ppm chloride environment: 3,000 hours no corrosion

PEX to PVC Fittings: 3 Transition Methods, Sizing and What to Stock

Why You Cannot Just Glue PEX to PVC A renovation crew tears out a copper riser and replaces it with PEX. Three floors down, the main is still Schedule 40 PVC. Somewhere between the two, a joint has to happen — and the instinct to solvent-weld a PVC fitting onto a PEX stub will not

1 August, 2026 No Comments

Knowledge

Brass Compression Fittings: What to Specify Before You Order

Ferrule material, tube-size compatibility and where brass compression joints actually leak. EN 1254-2 and ASTM F1974 limits, plus what to specify.

1 August, 2026 No Comments

Knowledge

PVC Pressure Pipe PN & SDR: Which Class to Specify

A purchase order that says “PVC pressure pipe, 110 mm, PN 16” is complete. One that says “4 inch, high pressure” is not, and the gap between them is where most disputed PVC deliveries begin. PN, SDR, DR, Pressure Class and Pressure Rating are five labels for one physical property — wall thickness relative to

31 July, 2026 No Comments

Media

Can PPR Pipe Fittings Be Used for Hot Water Systems?