Продукция

I once received a panicked call from a builder: a newly installed PEX system was dripping. This moment taught me that even the best systems have weak points if not handled correctly. Yes, PEX fittings can leak, but it is rare when the system is designed and installed correctly. Leaks almost always result from a […]

I once had a client whose radiant heating system failed early because of oxygen corrosion inside the pipes. This problem led us directly to the better solution: PEX-AL-PEX. PEX-AL-PEX fittings are special connectors for multi-layer composite pipes. These pipes have three layers: inner PEX plastic, middle aluminum, and outer PEX. This creates a strong, flexible,

I once received a panicked call from a contractor; a fitting failure had flooded a nearly finished home. The culprit was a cheap, substandard brass fitting. That moment cemented my belief in the non-negotiable importance of quality materials, starting with lead-free brass. Lead-free brass is the superior and safe choice for PEX crimp fittings because

I’ve seen this question cause real confusion on job sites. A plumber once asked me if mixing these types would cause a major failure in his project. Yes, it is generally safe to use PEX B fittings on PEX A pipes, as they are designed to be compatible within the same nominal size. However, the

I once got a panicked call from a client whose basement was getting wet from a cracked PEX line. The immediate pressure to stop the water is intense, and knowing the right steps is crucial. The best way to permanently seal a cracked PEX line is to cut out the damaged section and install a

I once got a panicked call from a homeowner with water spraying from a pipe joint. The so-called “glued” PEX connection had failed completely, flooding a utility closet. To handle a PEX pipe glue break, you must immediately stop the water flow, identify the exact leak point, and replace the faulty section using proper PEX

As a project manager, I’ve seen many failed DIY connections that lead to leaks. Connecting different pipe materials is a common task, and doing it right is critical. You connect a copper water pipe to PEX using a specific transition fitting, either a sweat adapter or a push-to-connect fitting, after properly cutting, cleaning, and preparing

I once helped a homeowner whose DIY copper pipe repair failed, flooding their kitchen. That moment solidified why a reliable, simpler system like PEX is a game-changer for many projects. To do PEX plumbing, you plan your layout, gather the right tools, learn a reliable connection method, and pressure test the system. It involves measuring

I once saw a control panel fail because of a bad wire connection. That single, poorly made crimp caused hours of downtime and expensive troubleshooting. It taught me that the right tool and technique are not optional—they are essential. An electrical crimping tool is used to create permanent, secure connections between wires and terminals by

I once had a client receive a shipment of PEX pipes that failed pressure tests, halting their construction project. This costly mistake taught us that choosing the right manufacturer is the most critical step. You choose a reliable PEX pipe manufacturer by verifying their international certifications, auditing their in-house quality control systems, evaluating their production