Les médias

30 ans d'histoire de la marque

Plus de 100 agents dans le monde

Équipement de traitement allemand

Dix séries de marchés publics à guichet unique

Can Be Solve issues Of PPR Pipe!

PPR Piping System Installation Guide

Introduction

PPR (Polypropylene Random Copolymer) plumbing systems have become a top choice for water supply projects due to their leak-proof connections, durability, and resistance to corrosion. But proper installation is key to performance and longevity. Whether you’re a DIY enthusiast, a plumber, or a project manager, this step-by-step guide will walk you through the correct process of installing a PPR plumbing system.

Tools and Materials Needed

Before installation, prepare the following tools and materials:

Tools:

  • Pipe cutter or rotary pipe cutter
  • Pipe fusion welding machine (with heating bush and adapters)
  • Marker or pencil
  • Tape measure
  • Pipe support brackets

Materials:

  • PPR pipes (PN10, PN16, PN20 depending on use)
  • PPR fittings (elbows, tees, unions, reducers, etc.)
  • End caps, valves, and transition fittings (if needed)

🔧 Tip: For the best results, use pipes and fittings from the same manufacturer, such as those from ifanpro Pipeline.

Step 1: Plan Your Piping Layout

Start by analyzing your building’s layout to determine the most efficient piping route.

  • Mark connection points (outlets, valves, water sources)
  • Calculate the total pipe length
  • Minimize unnecessary bends to reduce water pressure loss

Step 2: Cut the PPR Pipes

Using a pipe cutter, cut the pipe to the required length. Ensure the cut is:

  • Straight and clean
  • Free from burrs or rough edges

🛠️ Pro Tip: Do not use a hacksaw—it may leave uneven edges and reduce fusion quality.

Step 3: Heat the Pipe and Fitting

  1. Turn on the PPR welding machine and set it to the correct temperature (usually around 260°C).
  2. Allow it to heat for 3–5 minutes.
  3. Insert the pipe and fitting into the heating bush for the recommended time (e.g., 5–6 seconds for 20mm pipe).

⚠️ Caution: Do not twist or overheat, as it may deform the parts and weaken the joint.

Can Be Solve issues Of PPR Pipe!
Can Be Solve issues Of PPR Pipe!

Step 4: Join the Pipe and Fitting

  1. Immediately after heating, push the pipe and fitting together without twisting.
  2. Hold them in place for several seconds (cooling time varies by size).
  3. Let the joint cool completely before moving or applying pressure.

🔄 Repeat this process for each joint. Proper alignment is essential.

Step 5: Secure the Pipes with Clamps or Brackets

  • Install pipe supports every 50–100 cm for horizontal runs
  • For vertical pipes, use brackets to prevent sagging
  • Avoid tight bends or over-tensioning during installation

Step 6: Test the System

After completing the installation:

  1. Seal all outlets with caps or valves.
  2. Fill the system with water and pressurize it (typically 1.5x working pressure).
  3. Monitor for 30–60 minutes to check for leaks or pressure drops.

✅ If everything holds, your installation is successful and ready for long-term use.

Common Installation Mistakes to Avoid

  • Overheating or underheating the pipe
  • Twisting during fusion
  • Using incompatible fittings from other brands
  • Skipping pressure testing
  • Installing pipes without proper alignment or support

Why Use ifanpro Pipeline for PPR Systems?

ifanpro Pipeline offers high-quality PPR pipes and fittings trusted by builders and contractors globally.

Advantages of ifanpro:

  • ISO9001 & CE certified
  • High-performance PN20 pipes
  • Wide range of sizes and fittings
  • OEM/ODM and custom branding options
  • Technical support for installers

Visit ifanpro.com to explore our full product range or request a quote.

Connaissances
IFAN

Low Price ASTM F2389 PPR Male Elbow with Seat

If you’re looking for cost-effective yet high-quality plumbing fittings, especially for hot and cold water systems, the ASTM F2389 PPR male elbow with seat is a smart choice. This fitting is engineered for strength, durability, and easy connection to threaded components, all while complying with one of the most recognized international standards. In this article,

Lire plus "
saddle clamp
Connaissances
IFAN

BS 6572 HDPE Saddle Clamp Factory Customized

When working with HDPE piping systems, securing branch connections efficiently and reliably is essential—especially in water supply, irrigation, and gas distribution applications. One of the most widely used solutions is the HDPE Saddle Clamp, and for projects requiring compliance with British standards, the BS 6572-grade saddle clamp is a top choice. In this article, we’ll

Lire plus "
Connaissances
IFAN

High Quality PEX Stabi Pipe Wholesale

As demand grows for reliable and flexible piping solutions in residential, commercial, and industrial projects, PEX Stabi pipes are becoming a go-to choice for plumbers, builders, and distributors. These multilayer pipes combine the flexibility of PEX with the strength of aluminum for superior performance in hot and cold water systems. In this article, we’ll explain

Lire plus "
fr_FRFrançais

Nous acceptons les échantillons gratuits, veuillez nous contacter le plus rapidement possible !

IFAN depuis 1993, offre PPR, PEX, PVC, HDPE, raccords en laiton, vannes en laiton, robinets en laiton, etc.