The core of the PVC vs CPVC pipe decision is temperature. Both pipes share the same base polymer, and both look similar on a shelf, but standard PVC starts to soften and lose pressure rating above roughly 140°F (60°C), while CPVC holds structural integrity up to about 200°F (93°C). If the fluid running through the […]
PVC vs CPVC Pipe: Temperature, Pressure & How to Choose Lire plus "
The many types of PVC fittings all solve one problem: moving water or low-pressure fluid from point A to point B without a leak. A single job might call for a 90° elbow to turn a corner, a tee to split a line, a reducer to step down a size, and an adapter to meet
The choice of schedule 40 vs 80 PVC comes down to one number that never changes and one that does: the outside diameter stays fixed, but the wall thickness grows. That single difference decides how much pressure the pipe holds, how much water flows through it, and whether an inspector signs off on your job.
HDPE pipe fusion is how you turn separate lengths of polyethylene pipe into one continuous, leak-free line. Done right, a fused joint is as strong as the pipe wall itself, with no gasket, no thread, and no mechanical seal that can back off or weep years later. That single property is why municipal water, gas
HDPE pipe sizes trip up more orders than any other detail on a polyethylene pipe purchase, because the number stamped on the pipe usually describes the outside diameter, not the bore you actually flow through. A 4″ HDPE pipe and a 4″ PVC pipe do not share the same wall, the same ID, or the
English English
Français
Русский
EspañolIFAN depuis 1993, offre PPR, PEX, PVC, HDPE, raccords en laiton, vannes en laiton, robinets en laiton, etc.
