Media

30 years of brand history

100+ agents worldwide

German process equipment

Ten series of one-stop procurement

How do you install PPR pipes for drinking water?

1. Why Choose PPR Pipes for Drinking Water Systems?

  • Key Advantages:
    • Non-toxic, odorless, and compliant with international drinking water safety standards (e.g., NSF/ANSI 61, ISO 22391).
    • High resistance to corrosion, chemical damage, and bacterial growth.
    • Thermal stability for hot and cold water applications (operating temperature: -10°C to 95°C).
    • Lightweight and easy to handle, reducing installation labor costs.
  • ifan Pipeline’s PPR Pipes: Manufactured with food-grade raw materials, certified for potable water use, and tested for leachability and hygiene.

2. Tools & Materials You’ll Need

Essential Tools:

  • PPR pipe cutter or hacksaw (for precise cuts).
  • Hot melt welding machine (for fusion joints) or mechanical fittings (if using push-fit connections).
  • Deburring tool or sandpaper (to smooth pipe edges).
  • Measuring tape, marker, and pipe bender (for curved installations).
  • Pressure test pump (to check for leaks).

Materials:

  • PPR pipes (select the correct diameter and pressure rating, e.g., SDR11 for 16 bar pressure).
  • Fittings: Elbows, tees, unions, valves, and end caps (ensure they are PPR-compatible).
  • Sealing materials (if using mechanical fittings: O-rings, thread seal tape for metal connections).
  • Support brackets or clamps (spaced 60-100 cm apart, depending on pipe diameter).

3. Pre-Installation Preparation

  • Plan the Layout:
    • Sketch the pipe route, avoiding direct sunlight (use insulation if exposed) and high-temperature areas.
    • Mark locations for fixtures (taps, water heaters, filters) and ensure compliance with building codes (e.g., minimum distance from electrical wiring).
  • Inspect Materials:
    • Check for scratches, cracks, or deformities in pipes/fittings.
    • Verify pressure ratings (drinking water systems typically require 10-16 bar for residential use).
  • Prepare the Workspace:
    • Ensure proper ventilation and safety gear (gloves, eye protection).

4. Step-by-Step Installation Process

Step 1: Cut Pipes to Size
  • Use a pipe cutter for square, burr-free cuts (avoid hacksaws for large diameters to prevent uneven edges).
  • Deburr both the inner and outer edges to prevent debris from entering the water system.
Step 2: Join Pipes & Fittings (Hot Melt Welding Method)
  1. Heat the welding machine to 260°C ± 5°C (standard temperature for PPR).
  2. Insert the pipe and fitting into the heating dies for the recommended time (e.g., 5-8 seconds for 20mm pipes, per manufacturer guidelines).
  3. Remove both parts and quickly align them, pushing the pipe fully into the fitting without rotating. Hold for 10-15 seconds to secure the joint.
Step 3: Install Pipes with Support Brackets
  • Attach brackets to walls/floors using screws or adhesive (avoid over-tightening to prevent pipe deformation).
  • For vertical runs, use adjustable brackets to accommodate thermal expansion (PPR expands ~0.15mm/m°C).
Step 4: Connect to Existing Systems
  • Use transition fittings (e.g., PPR-to-copper or PPR-to-PEX adapters) for mixing with other pipe types.
  • Ensure metal connections (e.g., threaded fittings) are sealed with food-grade thread tape to prevent contamination.
Step 5: Pressure Test the System
  1. Close all outlets and fill the system with water, bleeding air through faucets.
  2. Increase pressure to 1.5x the working pressure (e.g., 15 bar for a 10 bar system) and hold for 30 minutes.
  3. A pressure drop >0.1 bar indicates leaks—check joints and re-weld/fix as needed.

5. Post-Installation: Flush & Sanitize the System

  • Flush the Pipes: Turn on all taps and let water run for 15-20 minutes to remove debris.
  • Sanitize (Optional for New Systems):
    1. Mix a solution of 1-2% food-grade hydrogen peroxide or chlorine bleach.
    2. Circulate the solution through the pipes for 2-4 hours, then flush thoroughly with clean water until no odor remains.
  • Inspect for Leaks: Check joints and brackets again after 24 hours of operation.

6. Common Mistakes to Avoid

  • Using Non-Potable Grade Materials: Always verify that pipes/fittings are certified for drinking water (look for NSF 61 or WRAS approval).
  • Overheating Joints: Excessive heat can degrade PPR, leading to weak connections—follow manufacturer welding times strictly.
  • Ignoring Thermal Expansion: Install expansion loops or flexible connectors in long straight runs to prevent stress on joints.
  • Skipping Pressure Testing: Even minor leaks can cause mold or structural damage over time.

Conclusion

Installing PPR pipes for drinking water is a reliable, long-lasting solution when done correctly. By following these steps—from material selection to pressure testing—you can ensure a safe, leak-free system that meets international hygiene standards. For high-quality PPR pipes and fittings designed for potable water applications, explore ifan Pipeline’s certified products at ifanultra.com.

Knowledge
IFAN

Wholesale IFAN EN 15874 brass gate valve R04

1. Introduction: The Critical Role of EN 15874 Compliant Brass Gate Valves 2. What Makes the IFAN R04 Brass Gate Valve a Top Choice? Key Features & Specifications 3. Where to Use the IFAN R04 EN 15874 Brass Gate Valve? Diverse Industry Applications 4. Wholesale Benefits: Why Choose IFAN for Your Brass Gate Valve Needs?

Read More »
Knowledge
IFAN

Buy IFANPLUS GB-T18992 Bronze Fittings bush

1. Introduction: The Critical Role of Bronze Fittings Bush in Industrial Systems 2. What Makes IFANPLUS GB-T18992 Bronze Fittings Bush Stand Out? 3. Key Applications: Where to Use IFANPLUS Bronze Fittings Bush 4. Why Choose IFANPLUS for GB-T18992 Bronze Fittings Bush? 5. How to Select the Right Bronze Fittings Bush: A Buyer’s Guide 6. Ready

Read More »
Knowledge
IFAN

Purchase custom brass ball valve 81067

1. Introduction: The Critical Role of Custom Brass Ball Valves in Industrial Systems 2. What Makes Brass Ball Valve 81067 a Hot Choice for Customization? 3. Customization Options: How to Tailor Valve 81067 to Your Needs 4. Ideal Applications: Where Custom Brass Ball Valve 81067 Shines 5. Why Choose Our Factory for Custom Brass Ball

Read More »

We support Free Sample, please contact us ASAP !

IFAN since to 1993, offer PPR,PEX,PVC,HDPE,Brass Fittings,Brass Valve,Brass Bibcocks etc.